Decorative Flower Stand via Horse

                                                     Decorative Flower Stand via Horse

                                                           ornamental Flower Stand

The horse carriage, which is about to end up shattered and nearly all elements are shattered,
Will now continue to its new existence as the decorative Flower Stand ..

beforehand I had recounted the horse auto in the backyard Sculpture painting newsletter :)
happily, at the end of the auto, which was wanted, he located an escapist :))

i've the opportunity to walk around the 2nd old handicap keep. Correctly, we handiest in finding in this district
I was once not restrained. The 2nd hand items dealers in the neighboring provinces,
Is there some thing new, and so forth. Etc .. To ask a name each 15-20 days :)

Our car was in particularly unhealthy . I suppose, My sister and i are very sufferer indeed :)
repair the situation .. Paste it here .. Sticky does not come superior again, more desirable
Paste with glue .. Various pieces we gathered :)) puzzle used to be like for us :))

After the repairs I made some sandpaper with sponge sand on account that it cannot be touched
There used to be a tough floor at the time ..

Painted kitchen tables

                                                     Painted kitchen tables

that you could paint your furnishings you wish to have to eliminate for the reason that it looks historical or is consistently looking out and that you would be able to make them back as a crown. While you say sanding, lining, this job can develop in your eyes, however after getting won experience, you can also need to hand in any historic or perhaps new furniture you see. It is fundamental that you just comply with the portray steps right to your furniture when changing furniture color. Some furnishings will also be painted very quickly, at the same time others can make you a bit of bit worse.
Steps to Be Taken When altering furnishings Engines

we can element these items below, but first let's variety them roughly:

Drawer-like portions of furniture are removed.

The furnishings is totally cleaned and dried with a moist, gentle soapy cloth.

Put furnishings on a enormous nylon in order that it's not contaminated.

If spray / spray paint is used, it must be worked outside. For different varieties of paints, you should decide upon a room the place that you could ventilate if the paint is more likely to smell.

If the furniture is already painted with a elegant surface, polished, oil painted or lined, it's sanded first. The sanding quantity will cut back according to the lacquer thickness. The surface is sanded unless it turns into dull. In case you have a rough, unpainted wooden in your hand, you are going to only ought to grind the outside reasonably.

After the sandpaper, the dirt of the furniture is taken again and cleaned.

The furnishings is lined.

After the primer is dry, a nice sandpaper is made and the dirt is cleaned.

Follow twice as a lot paint (if quintessential more) on the primer. (it's primary that the paint is dried before each other paint after passing the paint.)

The furnishings is varnished after the paint has dried to make it long lasting, delicate and easy to wash.

Preparation segment before painting the furniture

Having a excellent preparation with out coming to the painting stage will furnish you with fine outcome if you're going to paint furnishings. Which you can hear people who have beforehand used furnishings do not use lining, emery or paint or varnish. But when some steps aren't taken, sure, the color of the furnishings may just exchange, but the paint does now not show up to be within the slightest narrowness, or the outside does now not appear to be rough. The advocated steps for a excellent outcome will have to not be overlooked.

Whether or not you'll paint a cupboard or a chair, it's essential first smooth your furnishings with a bit of soapy water.

If the color of the furniture is too dark or the varnish is damaged and you might be in negative situation, you need to use primer.

Coating furniture is intricate to maintain paint. Should you keep the color via layer coat, this time the paint may also be easily removed. A just right paint signifies that the paint sticks well to the skin. A pouring paint can quite simply empty the sweatshirt.

Decision to make sandpaper when painting furnishings

for many, the main step that makes furniture portray intricate is sanding. It may be very tiring to get sandblasting via hand, not with higher sanding machines. Already therefore, you're going to see so many makes an attempt to dye without any abrasion when it is predominant and quintessential to be told at each possibility.

Which you can evaluate the following items earlier than you are taking the danger of dyeing and not using a sandpaper.

If the skin of the furniture is shiny and really gentle, it might not be proper to go the sanding step. Paint and even lining can with no trouble be poured from such surfaces. High-quality sanding with a sanding of 220 or 320 will enable the paint to stick. Glossy surfaces ought to be raveled earlier than going to the outside.

It is endorsed that you do not pass the sanding step if the furnishings has been dyed or waxed on it. The paint and liner will not maintain the wax on a cultured floor.

Rough spots, paint spills or grooves must be used for sanding or applying wood paste. If the paste is applied to the damaged surfaces, it is better to apply the primer first in order that the paste does now not deteriorate.

If you don't sandpaper, it should provide higher adhesion of oil situated primer paint.

Consider carefully before embroidering large lined furnishings for sanding. It could no longer be a good concept. If you are now not used an excessive amount of and you are an ornamental factor that you simply feel won't wear out, you can are trying. You can also have to paint a couple of times.

Primer After Abrasive

The primer software stands out in phrases of long existence and professional appearance of the paint. When the primer is utilized, the underlying color is blanketed, the furnishings paint is much less absorbed and a smoother look is received. Most importantly, the paint applied on the primer will adhere higher; It does no longer come out with ease in the slightest narrowness. We stated above why the sandpaper is integral. In case you have no longer saved it from the sanding step, it could be quality if you could once again make the sanding after you have dried the lining in order that your furniture looks like it's simply out of the shop!

Primer Paint After Drying

after getting chosen your paint finish, that you can quite often conclude painting with two coats of paint. You should use water-situated or synthetic (oily) paint. Depending on how you wish to have a appear, which you can follow a smooth or matte conclude. The point to notice is that we need to comply with the recommendations of the paint thinning and drying. You should now not paint excessive of the paint. Yet another predominant factor is that the paint will not be sufficiently thinned or thinned and could have negative outcome.

Whilst you purchase the paint you are going to realize that additionally it is suitable for the wooden surfaces you buy. Only the partitions produced for the wall is probably not durable in wood. Which surfaces are suitable for the paint you pick can most of the time be discovered under the heading 'applied surfaces'. For those who are not able to see the outline on the package deal, that you could get the product know-how from the web or purchase the paint from the related man or woman in the situation.

One of the crucial colours that the internet users have been pleased with as a furniture paint are as follows:

Caparol Trimaxx Matte synthetic Paint (Coating applied to furniture.)

Polisan Matrix Lux Anti getting older X1 Water situated

Swing colour shiny finish

Polisan Primera synthetic Paint brilliant White (Cellulosic thinner thinned.)

Marshall Pastel Mat Paint (Wall, wooden and metal paint)

the brush hint is likely one of the splendid points when painting furnishings. This will also be done through first brushing the paint, then passing it over with the roller, or with the aid of portray it directly with the roller. (Of path, brushes are nonetheless imperative for nook, facet, and so on.). However, no longer every roller is suitable for each paint kind. You will have to decide on brief hair, lengthy hair or sponge roller in line with your chosen color and measurement. That you may seek advice the crest or associated man or woman at the same time you buy it. Relocating the curler in a single course may be the solution for no longer leaving traces.

Spray painting is an additional process for furnishings, however you must obviously work outside with spray paint.

inal Step: Varnish

When deciding on a varnish, a great varnish must be chosen in order that it does now not rewind afterwards. Exceptionally the criticism in regards to the bleaching of polyurethane varnishes in vase painted furniture. The lacquer step can also be not noted in furniture that might not be cleaned mostly, and not too much to be had. The best of the paint can be primary. Some paints won't need to paint. That you can consult the person worried when buying this paint. Matching the endorsed merchandise in your paint in both primer and varnish selection will aid you get the first-class finish.

Whether or not it is varnish or paint brush, the first-class of the products will immediately affect the end result.

Find out how to clean My Heating Pads Myself

                             

  Find out how to clean My Heating Pads Myself

The honeycomb is certainly one of modern-day easy instruments to warm up. There are many handy ways to get the warmth effectivity to a excellent degree and to get it to the desired temperature with a hand gesture. There are some steps on how to clean the boats myself. However these steps will require guide skill, careful work and some breaking. In addition, when the radiator is removed from its location to scrub it with water, it varieties the honeycomb cleansing factors used for primitive approaches.

In the methods to scrub the pooch myself;

The boiler need to be closed,
There are valves to empty water from the Balkonda or from the toilets. It's integral to drain the water from these vans.
As quickly as the discharge procedure is over, there are 2 filters referred to as combo inlet valves.
The valves in these ought to be opened with the important thing and the filters in it ought to be removed. These filters should be thrown in a container stuffed with bleach.
The best way to clean the pouches myself should be closed after the radiator valves in the honeycombs are within the backside and prime. The rationale for this method is to take away the balloons. For this reason, the records of valve connections need to be opened. Then, when the valves are separated, a hand and muscle force have to be gently pulled up from the petticoat.
When the honeycomb is removed from the web page, care have got to be taken when moving it to the discipline to be washed. It additionally desires to be transported directly to a bath or balcony. It is the heavy and troublesome a part of the job of cleaning the pouches myself.
After the honeycomb has been moved, the honeycomb must be delivered to the valve entrances, the fountain and the hose connection, ie the hose, to the entrance of this valve. It is foremost that the water is pressurized there, so it's vital to give a high stress to the hose when it comes out of your hand. Therefore, careful dealing with should be executed here about methods to easy the gloves myself. So for a more healthy job, one other individual could also be wanted.
When it's transferred into the water via the valve hole with the hose, a soiled water will float from the opposite side. This step will have to be carried out with the aid of turning the pete any other way, until the soiled water turns into clear water.
In this approach that you could clean the pockets of your house to be able to easy the pouches myself. You can then exchange the paddles and change them with the strainer you at the beginning removed. Then add water at 1.5 or 2 bar and open the drain valve. The water you fill right here will drift once more. To be certain of a entire cleaning.

               

                                    How Do I smooth Pots myself?

The right way to easy the Pouches on my own persisted ...
Add water on the equal cost to clean the pods myself. Close the vanities and  collecting the honeycombs. Since the air within the honeycomb reduces the effectivity of warming. Which you could stop the bleed when the water starts offevolved to come from the honeycomb pygmy.

These are the systems that may be applied by those people who are questioning  easy my own self pockets at home. However, a very poor aspect is that during the procedure of repairing honeycombs or combinatorial injury after a incorrect step.

How to Build a Water System?

                                               How to Build a Water System?
Cold Water Installation
Installation of Plumbing with Steel Pipes: The galvanized steel pipe must be connected at a sufficient distance to the vineyard. The pipe should be measured and marked. It should then be cut off from the marking area and the pipe mouth cleaned for threading.

Then, the number of the thread that corresponds to the diameter of the pipe should be attached to the thread of the thread. The sheet must be adjusted to the direction of the ratchet and should be attached to the tip of the pipe to be threaded. Vertical pressure must be applied to the axis of the punch and the sheet must be turned clockwise.
The teeth are fixed and the machine oil is dripped on the teeth, so that the paftan is not heated and also a comfortable threading is provided. The tooth size must be as large as 2 teeth.

Direction changes must be made after joining with galvanized steel pipe joint. Never bend, bend and weld these processes, especially hot work.

Otherwise, the galvanized pipe will lose its properties and cause corrosion of the pipe.

Absorbent material must be wrapped on the tooth which is opened absolutely. This material may be a teflon tape or linen. But the best material is self-contained. The Teflon tape is only a silicon based material. Teflon tape should be used especially for materials that are covered with chrome nickel such as extension piece, faucet and valve.

The sealant is attached to the thread of the wrapped tube and tightened. The attachment must not be over-tightened because the attachment can be cracked excessively. Such a situation can be endemic to water leaks. The most important point that should not be forgotten is that the last two fins of the pipe should not be bored. After the pipe joint is cleaned, it should be made aesthetically beautiful.

Taipei Base Design middle Designs an condo in Taipei metropolis for a young Couple

           Taipei Base Design middle Designs an condo in Taipei metropolis for a young Couple

Taipei Base Design core Designs an apartment in Taipei metropolis for a young Couple and get new design inspirations. Inside-Designing.Internet updating modern news about attractive house designs, home ornament, inside design, furniture design, interior design, bedroom Designs, dwelling Room Designs, rest room Designs, Kitchen Designs, Teen Room Designs, kids room design ,add-ons design, decoration design, components design, eating room design. It’s might be useful for you in adorning your dwelling. You can share dependent snap shots in your social community, or pin it in your curiosity assortment. Please support and comply with us to get new residence design ideas and new design traits.
This majestic condominium placed in Taipei metropolis, Taiwan used to be designed by Taipei Base Design core for a young couple. Each of their jobs are involving fashion. In the beginning, we are struck by means of the sobriety of its rather dark decor. The residing room consists best of a kind “Chester” teach and two wing chairs. Its greatest draw? The large home windows which permit us to have an unobstructed view of the outside and whilst enable the distance to be full of usual light.

On the opposite side of the room, and having as historical past a line of mirrors that hides two doorways leading to the essential bed room, we find the dining room. In a at ease however based variety, its chairs and desk in uncooked wood and with nothing else so as to add, is bordered on one part with a line of home windows and on the other with a counter that connects the kitchen with the rest of the atmosphere. A today's kitchen that is even as realistic and sensible

The dark wooden ground offers it an impressive touch and accentuates the sort of its design.

5 ideas for a better looking bathroom

Countless ideas can be passed on to a stylish and impressive bathroom decoration. In the following article we compiled 5 ideas for a more beautiful bathroom. Now look around in order.
                 
                                                   1. Hide the mess

The modern bathroom in the picture is quite nice and impressive. However, a washing machine, detergent, and other materials that are required to be in a bathroom will ruin the beautiful scenery. So what do you think about this practical cabin idea?
                     
                                            2. Flexible design

The second example has a tremendous design. In addition to the marine blue tiles, both the pottery on the wall and the wash basin are designed in a resilient way to make the canyon even more like the sea. It's a simple but fascinating idea.

3. Banyoda flower deseni

There is a 'flower-like' bathroom example that carries the Sign of Wisdom Design. In the picture we see the canyon sink area. The details of both traditional and unusual sink design are beautiful. If you have a flower design in the bathroom, you can use it in your own canyon.

4. Color burst

In the case of another bathroom, red bathroom cabinets create a color burst. Such an eye-catching color is difficult to adjust to the bathroom. But you can solve this problem using only certain parts. For example, apart from the cabinets in this bathroom, a mirror is used in the frame of the red.

5. Stunning ceiling

If you are looking for a luxurious bathroom model, you can focus on a single partition instead of selecting all the equipment from exaggerated pieces. In the photo, the ceiling was chosen for this idea. Gradual ceilings have come to the foreground by adding light to the progressive holes. The rest of the canyon does not play a role with being modern.

How To Prevent Home Küflenmesinin Losses Of Crops

While indoor plants add beauty to the house, they clean the air as well. Molds can be seen in plants beginning to flow.

In addition to beautiful images and pleasant smells, flowers can grow in some cases. If you are allergic to mold, you may be harmful to your health. What should you do to prevent indoor plants from getting moldy?

Superficial Mold

If only potted soil is infested, it is still early. Carefully remove the plant from the root to prevent the spread of the küf and the contamination of the plant. Fill the pot with fresh soil and plant the plant again.

You can use a spray can to drain new soil. If you do not have the opportunity to change the new land, you can get the grounded area on top of the land. Then vent the land so that the root will not be damaged.

Molding in Dust


Powdery white molds are usually visible on the leaves. Wipe this mold with a damp cloth. In this process, do not give too much water to the flower. Make sure the oven is well ventilated. Molding is usually caused by excessive irrigation and airflow.
                                          

Mushroom Diseases

Fungal disease usually appears as small brown stains. These stains are on the leaves and stems of the plant. This disease can switch between plants. For this reason you should separate the plant from the other plants you see mushrooms. Clean the mushroom leaves and do not give too much water to the plant. Fungus usually occurs on old leaves.

Foundation Mold

This mold is in the form of black powder and is caused by plant insects. Take a cuddly cloth and spray the plant. You should also take yellowing leaves.

Block Molding

Do not give too much water to the plants. When you are away from home for a long time, you need more water than you need. This is a wrong method. Remember, the plant is mild when exposed to prolonged exposure.

Some plants may develop fungal disease when watered at night. You should know how much water your plant needs and always give the same amount of water.

When cleaning mold, you should use gloves and a mask in order not to damage your hand. After cleansing the plants, you should wash your hands and face with plenty of water.

The Flowers Should Be In What Time?

Over the summer, excepted benjamin, devetabanı, Begonia, Cactus flowers, such as how is wintertime?

Type balcony or in the garden, and maintained a healthy development that represents some type of flowers may need to be taken in a warm environment. This should be set to the correct time.

How Is The Winter Flowers?

Some flowers are not much difference for some time for the summer heat when the cool air of the ends and it's the right time. Cool air trying to fit in when they enter the environment plants suddenly hot may be damaged, so, without further ADO to be taken home.

Plants are rather scarce, where they can see the damage in the cold from the heat. The petals may be problems such as corruption, root decay. It is important that the right time to avoid them.

The right time to Istanbul in September, is the latest is the head of October. Ankara where harsher climate, such as the end of August and September is the right time per. While you can open Windows built in the House yet flowers should be taken home. Thus flowers easier adapted home.

After taking home the flowers and the frequency you should decrease the amount of watering. In addition, by opening your Windows during the winter flower several times a day, don't forget the air nicely.

For these plants do not need to be protected until December. Other places are subject to change. Geranium, Fuchsia, azalea, Camellia, gardenia, cyclamen, geranium, ornamental n, rose.

North winds ground off the fronts that are not at all required. In a place like this, although outside Geraniums, siklam those who continues to blossom.

In winter, you should not import plants home balcony you can keep in the greenhouse. But you must keep off all the time. Unless they fall below zero throughout the day and the heat can remain open. Temperature 3 ° c and lower, you can keep when. This type of balcony greenhouses cold of-7 ° c at most so it works.

To show your flowers for healthy development should note the environment where they are located.

Why do not Petels Warm?

                                                 

                                             Why do not Petels Warm?
There are several reasons why your pet's gold does not heat up. However, heating problems are often caused by improper installation practices.

If the bottom of the petticoat is not warming up, you need to clean it. The initial warming of the bottoms of the honeycombs, which give equally heat, means that the honeycomb has accumulated underneath the honeycomb. Since the water in the pipes does not travel quickly, the honeycombs do not warm up. You can make the honeycomb warm up by adjusting the regulation.

The return position of the petals should be adjusted so that the position of the opening is close to the valve under the petticoat. The nearest valve is too low, the farthest valve must be very open. These settings may vary depending on each house and facility.

Heater Heats Up

If there is no abnormal temperature difference between the upper side and the lower side, you should definitely use protective medicine after clearing the pads.

If the heating pads are burning at the bottom, the honeycomb connections should be checked. To understand this, close the combi and wait 45 minutes. You can detect the non-burning location after you restart the boiler.

If no honeycomb flakes are burned except for the nearest honeycomb, the circulation pump of the filter and combination under the combination must be checked. The coldness of the bottom of the combine does not mean that the combination is defective.

An additional pump can be connected to the bottom of the combi boiler if they still do not burn properly. When a non-combi boiler is connected to the pump, it is obligatory to put one equilibrium container in order to operate at the same speed as the combi boiler pump. The equilibrium will ensure that the air formed in the system is thrown away.

If there are very large temperature differences between the honeycombs in different rooms, you have to tighten the honeycomb valve in the rooms which are very hot.

It is normal that there is a temperature difference between the farthest honeycomb and the nearest honeycomb. However, in order to avoid this, the mobile system may be equipped with a heating system.

There may be fugitives on the pipeline leading to the non-warming shade. The six unheated honeycombs may have come to an illegal lane that is often too small to be noticed. In this case you should get professional help.

The check valves (upper valve) and return valve (lower valve) should be checked for openings.

The top of the honeycombs has purger for venting. Until the air is exhausted, the air in the petticoat is taken until the water arrives. When the purge is switched on, it must be opened counterclockwise and close clockwise. When venting, the honeycomb valves must be in open position. The cockpit valve closes clockwise and opens counterclockwise. The water pressure at the installation will be reduced while the bleed operation is being performed. Please note that the water level in the boiler installation, boiler installation is between 0.7 bar and 1.5 bar.

By applying these methods you can find a solution to the problem of not heating the honeycombs.

Finding a water leak without breaking

                                                       

The water system leaks, which were made by breaking in the past and being tried to be visually inspected, become a water leak detection without breaking through thanks to a professional team which is expert in today and the latest devices developed by the technology.

Leakage water is one of the biggest problems that come to the premises due to the fact that the water pipes are not able to fulfill the duty of the seals at the connection points due to the excessive pressure from the water pipes and the drainage from the seams.

If the leaky water system can not be detected, it leads to bigger problems. The owner of the building that escapes from the water hunt with the water leak detection without breaking is free from the fuzuli expenses. Only the owner of the building does not pay for the additional expenses like the owner's break, mastery, marble or tile costs. At the same time, marble, tile or rubble did not occur in the country's economy is affected by this positively.

If 1000 water leaks come up every day and these fugitives are detected with old methods instead of "water leak detection without breaking", both the building owner and the country's economy are affected negatively.

In order to avoid these negative events, many companies specializing in the detection of water leaks are using special devices in water leak detections that occur in water installations at home and work places.

Since the machines referred to under the name of water leak detection device are designed using the latest possibilities of technology, it is possible to make "water leak detection" methods with these devices without breaking, without spilling and easily.

The most important factor in the detection of leaking water is the determination of the leaks and the repairing of the leaks. This is done without breaking the floor, tiles, or walls. If there is water dripping from the roof of the lower neighbor, it is certain that the water is leaked, but where there is a water leak, there are detectors, acoustic listeners or cameraman using water leak detection devices to detect the water leak and detect water escapes.

Guaranteed solutions are waiting for customers at companies that combine technology and experience.

Finding a water leak without breaking

                                                                               

                                                 Finding a water leak without breaking

Fugitives can come into the water in old buildings or in water installations that are not done well. A fugitive from your side can harm your neighbor. Finding water leaks with old-style methods can create additional costs such as tiling, plastering, tile mastering and the like if the crushing is done.

It may not be the place where the water comes from the neighborhood. The water may leak from another place and leak into the neighborhood from the weakest point of the concrete. Those who use the old systems to find water leaks may also have broken water in the empty space.

Finding leaking water should be considered lucky if it is done with these methods and sitting in the house if it is found, because it is not possible to find Water Leakage by these methods. Then all the expenses are going to go down.

If you combine professionalism with the latest system of technology in finding leak water, finding a leak is economically feasible and at the lowest cost.

It is not necessary to break the water leak detection method made by the camera imaging devices, but the area which makes water leak by the superficial detectors is detected. During this determination, devices are used according to the water leakage.

The continuous formation of water droplets in the lower neighborhood is a symptom of a clean water leak and the water leak with the acoustic place listening device and test pumps is on the short notice.

Although the cost of fixing and repairing clean water leaks is low, if the leaks are found in old buildings and iron pipelines, the piping needs to be completely renovated as the pipe will be rotten.

"Dirty water leaks" are water leaks that occur in the outgoing pipes. In these escapes, the problematic place is detected with the pimaş observation cameras. These can be burdensome for the resident owner working without trial or error.

The quality and smooth construction of the "water leak detection" process becomes possible thanks to the cameras.

The loss of water in the boiler indicates that there is a leak in the heating line. In the central heating leaks, the observation camera and the leaked place are detected by point shot. If it is so small that it can not be detected by the camera, it is covered with medication.

Leaky water is usually not the housing where the water escape is, but it damages the lower floor neighbor. This is due to the fact that the plumbing passes through the bottom layer of the plumbing. Leaky water is leaked through the insulating material located on the top of the plate. It is a high possibility that there is a leak from the sewage system if the water is leaked from the clean water installation or the sewage system is determined by the devices but it is cut from the clean water installation once in a while and if it is dripping again.

                                                                     

Epoxy Flooring

                                                                                 

                                                                          Epoxy Flooring

Epoxy Floor Coating - What are the properties of epoxy flooring application?
Epoxy Floor Coating - Epoxy is generally used to protect concrete floors by forming a particulate coating plane.

Epoxy Floor Coating - It is a technological building material group which is developed in order to protect the building floors (inside and outside) by covering beautiful and aesthetic materials against all kinds of land and sea environment, against the worst and hard conditions of nature and industry. There are mechanical and physically resistant epoxy materials with superior adhesion properties which are used to bond and adhere construction materials in different structures.

Epoxy Flooring Features:

1- It is resistant to chemical products.

2- It is resistant to abrasion and abrasion.

3- It has a wide color spectrum during decorative applications.

4- Hygienic, cleaning is easy. By adding aggregate, non-slip surface can be obtained.

5- Resistance to oil and chemicals.

6- Esthetic.

7- Solvent free.

8- Protect you and your community with many influences.

Be sure to visit these pages for more information and insights on floor coverings;

3D tiling models

3D floor covering

3-D floor application

Advantages of Epoxy Flooring

1- Epoxy flooring is a modality that is applied for problem life in the face of any natural conditions of the centers. Technically enough product capacity is needed to make this application.

2. Despite all environmental conditions, it will be an important factor for demonstrating resistance. Therefore, it is very useful to work with competent, competent and successful people in order to adjust your hardness properly.

3- Despite bad weather conditions, epoxy flooring application will be possible.

4- Protection possibilities in internal and external factors are totally aesthetic.

5- It is possible to use it for construction as well as for physical change.

6- Specialists will assist you in setting up sufficient criteria for the understanding of the subject and in creating the general characteristics.

7 - Epoxy, a technological building material, is first considered when it comes to floor covering and has an important adhesion property.

8- In terms of floor coating application, thermal (thermal) treatments, frost disintegration and resistance against chemical effects are very important points. Faced with these changes, when the floor coating epoxy application is done, the enterprises will be comfortable.

9- Regardless of the circumstances, the applications made on this area are very important, and at the same time, these applications, which are also made in a comfortable manner in the field of construction materials, are in harmony with every atmosphere and every space.

Roof Type Air Condition

                                          Roof Type Air Condition

Roof type air conditioners are a type of packaged air conditioners. Roof-type air conditioners, which are individual air conditioners, are one of the most important issues in the air conditioning industry. The reason for this is the flexibility of use. The most preferred devices in use are packaged devices. In this article, you will have information about roof air conditioning systems.
Roof-type air-conditioners, which are generally placed on the roof, can also be placed on the floor or on the base. Roof type air conditioning systems whose primary function is cooling are monobloc. In the first section, the compressor, condenser, battery and fan are collected. In the second part, there are rooms for return, supply air and mixture air. The third section is the entrance room of the external air added to the second division. The first section concerns the cooling circuit, the second and third sections deal with the air circuit. For this reason, the first part corresponds to the outer unit in the split type and the second and third parts correspond to the inner unit. In the second part, there is a battery with filter, fan and motor as main parts. In the third part, there is a damper that encloses the outdoor air inside the appliance. In the cooling cycle, the outdoor unit battery serves as the condenser and the indoor unit battery serves as the evaporator.

Natural gas air conditioners are the air conditioners in which the compressor is driven by a natural gas motor instead of an electric motor. Natural gas is used instead of electricity as energy. The most important advantage of natural gas air conditioner is that the energy cost is low. The fuel cost of a natural gas air conditioner is about one third lower than that of an electric air conditioner. Another advantage of natural gas roof type air conditioners is its contribution to the environment.
We can list the advantages of roof type air conditioners with a package type air conditioner compared to a central system as follows:

- It is a united structure,

- Installation and installation is easier and more economical.

- Less channel space is needed

Roof-type air conditioning systems are used in residential buildings, restaurants, single or multi-storey office buildings, schools, shops in open shopping centers, commercial buildings, workshops and factory production areas, depending on their capacity. In this kind of climate which requires installation experience and professionalism, qualified and qualified companies should be preferred.
İşletmeler için Google ÇeviriÇevirmen Araç SetiWeb Sitesi ÇevirmeniGlobal Pazar Fırsatları Ara

How to Build Plumbing

                                                          How to Build Plumbing

The sanitary ware is made with water. The main material is water. We will talk about the paths that are followed when the plumbing is done.
As mentioned at the beginning of our article, the first step is sudur. Water becomes dirty as it functions in the pipes; First of all this dirty water should be thrown out of the building in such a way as not to damage it. The pipes used for supplying clean water are divided into two pipes as internal pipes and feed pipes. Inside the inner plumbing is a subdivision within itself. Now let's give some information about these sections.
Internal Plumbing provides water to the building. It consists of pipes that transport water to the apartments. The laying of the inner pipes is carried out by specialist installers. The pipes should be as short and non-twisted as possible. It is built on invisible places because it is not a pleasant image. A suitable tap is fitted to the tip of the appropriately laid pipes. The quality of interior piping is important for its use. Apart from that, the internal plumbing pipes; Appearance is aesthetic, sweating and noise should not do. Equal distribution to the building; It must be easy to find during meter checks.

Water Counter is the instrument that measures the amount of water consumed. The ends of the water meter are connected by putting the so called materials. To complete the installation, the meter must be fitted with a tap and then a tap. The valve cuts the incoming water when it is necessary. The faucet helps to drain the water after the valve is closed or in case of a possible fault.
The feeding pipe is also known as the outlet line. The pipeline is located between the city water network pipe and the water meter. Generally plastic water pipes are preferred. This pipe is buried in the ground. The pipe extends to the water meter. There are points to pay attention to when laying the supply pipe. For example, attention should be paid to weather conditions (frost, snow etc.) and overloads to be applied from the upper part. You can bury a few meters in the ground for this. Thus, it is protected from weather events and extreme pressure. Since the supply pipes are between the city water and the personal water meter, municipal workers are employed when laying.
Did you have your installation done successfully? To find out this answer, open the taps on the columns and empty the air, wait for at least fifteen minutes after the water is filled in. If there is no leakage, the operation is successful.

Bedrooms And Twilight Return Madness

                                      Bedrooms And Twilight Return Madness

Bedrooms are one of the most important parts of every house. The stress and intensity of daily life helps you to avoid these structures. At the same time, the concept of sleep is a very important factor for human life. If sleep is carried out in a comfy bed, you are better at sunshine. Therefore, the visually enriching of the bedrooms has also enabled the decorating industry to develop, thus influencing each other. Bedrooms have become a constant change from past to present. The most important of these are the concepts of nostalgia that we encounter quite often nowadays. Bedrooms and the returning madness of the past have become very important designs in the direction of ever-increasing demands.

                                   How can we catch these nostalgia breezes?

First of all, a bedroom must have a bed, a basement, a closet. In addition to the toilet, two bedside tables and a dresser can be added. However, the main materials used do not change in any way. For the design of bedrooms, designs are applied by going out from these main structures. The use of wood in nostalgic designs is the front end. It gives the atmosphere of the environment suddenly by giving the aged air. So nostalgic bedrooms have a serious say in their design.
Another important element in the nostalgic bedrooms is that the wall colors of the environment must obey this obligation. For example, these teams can not remove the wall paintings in vivid colors. If you want to create a nostalgic atmosphere in your bedroom, you should definitely not use vivid colors. Otherwise, how hard you have worked for the team and how good a team you are, when you use vivid colors that magic lifts. Therefore, the colors we can recommend to you; Rose grass, beige tones will be mat colors.
Finally, please note that what is important here is entirely up to you. With any nostalgic design you want, you can add a few figures to make great designs. The important thing is to discover your imagination and reveal the designer spirit in you.